1、采用傳統流漿工藝與自動厚度調節系統結合，確保板面平整 ,厚度均勻；
Traditional flow on process and automatic thickness adjustment system are combined together, which ensures flatness of the plate surface and uniformity of the thickness.

2、采用新型真空箱，內腔平滑無死 角，解決集料問題；
The new type vacuum box is adopted, and the inner cavity is smooth without dead angle to solve the problem of aggregate.

3、出廠前滾筒平行度矯正，毛布自動張緊，自動調偏，更換 毛布更加迅速；
Before leaving the factory, the parallelism of the drum is corrected, the felt is tensioned automatically, the deviation is adjusted automatically, and the felt is replaced more quickly.

4、專業防水軸承，整機全部用不銹鋼螺絲連接；
Professional waterproof bearing, the whole machine is connected with stainless steel screws.

5、鋼絲和刀片交替使用的成型筒，薄板使用鋼絲切斷，故障 率底，只有厚板采用刀片切斷；
For the forming cylinder with alternating use of steel wire and blade, the thin plate is cut off with steel wire, the failure rate is low, and only the thick plate is cut off with blade.

6、新的測厚補償系統，準 確率更高，取消人工測量；
The new thickness measurement compensation system has higher accuracy and no need of manual measurement.

7、下加壓系統，板面更平滑，加壓比例控制，確保厚板不脫 落。
The lower pressurization system makes the plate surface smoother and the pressurization proportion is controlled to ensure that the thick plate does not fall off.

8、標配產品尺寸:(5-24)x1220x2440,本機可選配能制作 (5-24)x(1000-1220)x(1800. 2440、3050)

Standard product size: (5-24) x1220x2440, this machine can be selected to make (5-24) x (1000-1220)x(1800, 2440, 3050).